When we use the computer in daily life, we always meet such problems as PC dead and crashing. As for the new computer, this problem is caused by the no response program. As long as we forcibly shut down the no response program, the computer will work normally again. The solution to forcibly shutdown is to use Ctrl+Alt+Del at the same time, then there will appear the Shutdown dialog. You can use the mouse to choose the program and click End Program button, it is ok. If the PC is dead too much, you can not even display the Shutdown dialog or the PC is blue screen, you can only use the compose key or the reset key to restart the computer. Then how will you deal with the following situation?
1. Power Failure
When the power is cut, you are advised to turn off all the electricalsource in case that the screen and ATX will start at the same time when the power is on, which will do damage to the computer hardware.
2. The electrical outlet is too old.
Because the high-velocity hard disk will cost much electricity, the old electrical outlet can not stand the high voltage and high current, in this case there will lead to the PC dead or restart. Therefore you are advised to change a heavy power electrical outlet which will offer the safest guarantee for your PC.
3. Auto Power-Off
If the temperature of the CPU is so high that it exceeds the temperature limit of BIOS, the BIOS will shut down the computer automatically to protect itself.
4. System Failure
System failure is usually caused by the damaged files or unsuccessfully loading the command.
5. System Crash
The PC screen is locked even the ALT + CTRL + DEL can not start the PC again. This problem is caused by the system bug or too small compatibility among the software. If you run several programs at the same time, it will often cause the system failure.
6. Blank screen at Startup.
When you are ready to start the computer, the electrical outlet should power on first, then the BIOS will have a self-test and examine the CPU, memory, video card, hardware and hard disk. All this process, no matter which step has problem, the computer will can not start again.
7. Crack and Peculiar Smell
If the strings on the hardware or the disk have not been fastened, it will lead to the noise of crack. The peculiar smell usually comes from the host computer, you should save this problem for the professionals to deal with.
8. Memory Error
Except the bad memory bank and slot, the memory itself should take the big responsibility. If you set the CL value too small, it can often cause the PC restart.
9. The Display Card Error
This reason for the display card error is due to incompatibility between BISO and the display card.
There are many reasons for computer errors, those above are only the part. It is really headache for blue screen and frequent restart. Here I offer some preventive measures for those errors.
1. You had better not to overlock the CPU.
2. Be careful when you pull or insert the hardware in case of poor contact.
3. Set well the BIOS.
4. Do not use or open the unidentified software and email.
5. Do not power off before the software has not normally shutted down.
6. Please pay attention to the order when you load the software so as not to disorder the system management.
7. Do not use the small memory application to run the big-memory program.
8. You should always clean the dust on the host computer or it will affect the heating.
9. Do not share the slot with air conditioner and refrigerator.
10. Do not use the faked software.
Registry Winner is an advanced multi-language registry cleaner in pc diagnosis and repair. As an excellent registry cleaner, it can do a complete scan of the pc errors such as system slowdown, freezing, crashing and deadlock. Safely optimize the speed of the system and set your PC in a fantastic performance!